2000W Pure Sine Wave Inverter 12V to 120V AC with 2 AC outlets (IP54 ETL Approved Sockets),DC5V 2 Amp USB Output, LCD Wire Remote kit and OFC Battery Cables,Input terminals Fixing Wrench

Attention: Inductive loads need about 3-10 times of rated power to start, e.g. refrigerator, coffee machine, vacuum cleaner. Double check your inverter is sufficient power to start these loads. If the inverter surge power is not enough to start the load, you need to buy a higher power model. Simply it is to say that: Not a 2000W rated power inverter can start all appliances lower than 2000W. Always keep you are having sufficient DC power supply if you are using higher power output.(bigger size battery or keep your car engine is ON while running high power loads) Pure Sine wave inverter 2000W with IP54 waterproof sockets►Continuous Power: 2000W►Max Power: 2200W►Surge power: 4000W►Output waveform: Pure Sine Wave►THD: ≤4%Efficiency(Full load): 85%►Input voltage: DC12V (10-15V)►No load current draw: <1Amp►Output voltage: 110-120Vac 60Hz►With DC 5V 2A rated USB port and wire ON/OFF remote.►Protections: Overload, low voltage, over voltage, output short, over temperature shut off)►With dual thermal controlled cooling Fans(High speed)Operation Guide for the Wire Remote control ★To use this LCD wire remote ON/OFF control kit, you MUST turn the manual ON/OFF switch to OFF position. (Check the separate manual for the LCD display ON/OFF remote control kit. )To keep sufficient and continuous using, you better keep your car engine is ON if you are continuously using high power appliance!

• Continuous rated power:2000W Surge power: 4000W. With IP54 Industrial level ETL Approved output American sockets*2
• With DC 5V 2 Amp USB Output, Wire Remote Port
• Brand new design circuit board with dual high speed cooling fans guarantee for long time continuous running.
• With heavy duty battery cables and Input terminals fixing Wrench.
• With LCD Wired remote control kit. Cable length:16 Feet